Bleed

The bleed is the margin extending beyond the final format of the print product and will be trimmed by the cutting machine.

THE MOST IMPORTANT INFORMATION AT A GLANCE:

  • Bleed: circumferential 2 mm (if not specified otherwise)
  • Safety margin: 4 mm to the final format (if not specified otherwise)

If not specified otherwise, add 2 mm of circumferential bleed to your print files.

The bleed is the margin extending beyond the final format of the print product and will be trimmed by the cutting machine.

Why is the bleed necessary?

When cutting to final format, there can be deviations by up to one millimetre.

The bleed thus serves as tolerance for possible trimming differences.

Safety margin for important design elements

Important graphic and textual information which must not be cut should be located at least 4 mm from the final format if not specified otherwise.

If you include the bleed, these elements should hence keep a distance of at least 6 mm from the edge of the print file.

The safety margin makes sure that no important graphic and textual information is cut off.

Markers and guides

Feel free to use appropriate markers and guides (e.g. cutting, folding or register marks) to design your product in the layout programme. However, these must not be included in the export of the print files.

If this is impossible for program reasons, only include cut marks when creating print files.