Self-adhesive labels, round, 4.0 cm diameter
Artwork information Self-adhesive labels, round, 4.0 cm diameter
Data format (incl. 2.00 mm bleed): 4.40 x 4.40 cm
Trimmed size: 4.00 x 4.00 cm
Resolution at least 300 dpi for an original image size of.
Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size
Fonts must be completely imbedded or converted to curves.
colour mode CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
Maximum colour application of 300%
We will not check for spelling and/or typographical errors.
We will not check for overprint settings.
Transparencies created with CorelDRAW must be reduced.
Comments will be deleted and not printed.
Form field content will be printed.
Please observe the following for stickers/films:
White elements cannot be printed.
The lighter the colour, the more transparent the film
The motif is printed right-reading (self-adhesive side on the reverse of the motif). If a motif is applied to the inside of a window to be seen from the outside, the print files must be created as mirror image.
Please note our modified data info for an optional contour cut.
Single-sided colour print (4/0) back blank
self-adhesive, permanent-stick labels
ready to use and easy to peel off (without scrap material)
superior material, ideal as bottle labels
The coating of the label paper imparts the material with durability.
We optionally deliver your labels on separate rolls. The ordered quantity of labels will be evenly distributed optionally on two rolls (each 15.6 cm wide) or three rolls (each 10.3 cm wide).
The labels are delivered on a roll. Roll width: 33 cm, inside diameter: 76 mm.
The labels are placed side by side on the backing material.
For free download templates, go to the "Details" tab.